Tools Required
- Electric drill
- Hammer drill
- 6mm masonary bit
- Phillips screwdriver
- Spirit level
- Measuring tape
- Sharp pencil
Hardware Required
Shutter panels will be pre-hinged, and magnets are supplied where necessary. All hang stripes will be pre-drilled and countersunk. Hinges will be supplied, fitted to the shutter panels and all screws and fixings will be provided.
To see our online manual, please click on the links to the pages below:
- Installation Overview
- Step 1: Measuring the Window Opening & Step 2: Prepare the Shutters
- Step 3: Loading the Hinges & Step 4: Installing the Hang Strips
- Step 5: Aligning the Shutters & Step 6: Marking the Hinge Position
- Step 7: Hanging Shutters to Hang Strip & Step 8: Fixing Magnets or Receiver Catch